Tactical EUD Management
VELOX is an integrated ecosystem built around select models of the OPRTR case. It protects the device connection, secures the EUD to kit, and supports charge, sync, and redeployment cycles, from the team room to downrange and everywhere in between.
Three challenges that defined VELOX.
The EUD (End User Device) is an essential part of the tactical communications kit. To better understand what operators need in the field, we surveyed end users about where their current setups fall short and what could be improved. Three key challenges stood out:
Faster connect and disconnect.
QD cables are proven, but some operational moments require a faster connection point. VELOX moves the working connection into a rugged interface for quicker connect and disconnect capability in the field.
The connection is a failure point.
The USB-C connection interface is the most critical yet delicate part of the EUD, and a common failure point in harsh environments. VELOX seals and protects the vulnerable connection, mitigating risk from repeated connection cycles.
Manage a whole team at once.
Charging, data syncing, and updating multiple EUDs between missions can slow teams down. VELOX turns device readiness into one team-level workflow, helping teams reset faster and redeploy with confidence.
Charge. Sync. Mount. Redeploy.
VELOX enables efficiency for the full mission lifecycle. Devices can move from team-room prep, to mounted use, to post-mission turnover without removing the EUD from the OPRTR case.
Team devices start ready.
The Dock supports team-level charging and data sync while the EUD stays protected in the OPRTR case.
Load the next mission package.
Use the team's MDM of choice to push updates, move files, and configure OPSEC factors before the next deployment cycle.
Smart-Block carries the connection.
VELOX Smart-Block replaces the OPRTR QD door, seals the EUD USB-C port, and enables the 15-pin USB 3.2 interface.
Armor Mount secures the EUD.
The EUD mounts to the plate carrier while integrated cable routing keeps the kit streamlined, avoiding snag hazards.
Power and data move through VELOX.
The VELOX Smart-Block interface supports charge and data connection across all VELOX system components.
Keep cables off the EUD.
Moving the working connection into the mount reduces exposed cables on the plate carrier.
Offload data after mission use.
Return the EUD to the Dock to support data offload and charge without removing the device from the case.
Stage the next mission faster.
Charge, reload, and move the EUD back to the user's kit with fewer touchpoints.
Prepare the EUD
Charge, sync, and load mission data before the device goes back to the user.
Team devices start ready.
The Dock supports team-level charging and data sync while the EUD stays protected in the OPRTR case.
Load the next mission package.
Use the team's MDM of choice to push updates, move files, and configure OPSEC factors before the next deployment cycle.
Mount and connect
Move the protected EUD to the VELOX Armor Mount installed on the plate carrier.
Smart-Block carries the connection.
VELOX Smart-Block replaces the OPRTR QD door, seals the EUD USB-C port, and enables the 15-pin USB 3.2 interface.
Armor Mount secures the EUD.
The EUD mounts to the plate carrier while integrated cable routing keeps the kit streamlined, avoiding snag hazards.
Operate with less cable clutter
Route supported power and data from hubs and radios through the protected Smart-Block interface.
Power and data move through VELOX.
The VELOX Smart-Block interface supports charge and data connection across all VELOX system components.
Keep cables off the EUD.
Moving the working connection into the mount reduces exposed cables on the plate carrier.
Debrief, reload, redeploy
Dock the EUD after use to charge, offload data, reload, and stage for the next operational cycle.
Offload data after mission use.
Return the EUD to the Dock to support data offload and charge without removing the device from the case.
Stage the next mission faster.
Charge, reload, and move the EUD back to the user's kit with fewer touchpoints.
Four components. One connected system.
Smart-Block creates the powered interface. Armor Mount carries it on kit. The Dock scales it across the team. The Field Cable supports individual charge and data during mission.
VELOX Smart-Block
Replaces the OPRTR QD door, seals the USB-C port, and creates the 15-pin USB 3.2 interface.
VELOX Armor Mount
Powered PALS/MOLLE mount with Power Delivery Detect and integrated cable routing.
VELOX Charge/Data Dock
Six-bay dock for team-level charge, sync, data transfer, and redeployment.
VELOX Field Cable
Direct 15-pin to USB-C power and data connection for OPRTR cases equipped with Smart-Block.
Reference pricing does not include taxes, shipping, or custom integration work. OPRTR cases are sold separately.
Six EUDs. Or thirty.
Run a single dock for a smaller team, or daisy-chain up to five docks for up to thirty devices. Each dock supports charge and data connection through the Smart-Block bay interface. EUD provisioning requires a 3rd party MDM application, like Watchtower by Sherpa 6.
Smart-Block bay interface with modular device-specific cups.
Ethernet daisy-chain expansion across the team room.
Up to thirty devices managed in one charge/data session.
Integrated power supply supports up to 25W fast-charging per EUD bay.
The system in motion.
See the complete operational cycle of the VELOX system, from initial EUD setup, to mission ready and return.
The Juggernaut VELOX Ecosystem incorporates patented RAM® Mount technology that practices one or more patents related to GDS® IntelliSkin® technology, which can be found HERE.
A platform for supported partner technologies.
VELOX was designed with future integration in mind. The Smart-Block interface, Armor Mount platform, Dock, and Field Cable create defined places to evaluate supported partner technologies and mission-specific requirements.
Build Your Setup
Start with a compatible OPRTR case and Smart-Block, then add the mount, dock, and cable options that fit how your team manages EUD deployment.